HIOKI will be offering the new MEMORY HiLOGGER Model 8430-20, a highly portable, high-speed data logger. Despite its small footprint that unquestionably offers maximum convenience, this instrument provides ten channels with 10ms sampling for high-speed measurements: ten times faster than our previous models. The 4.3-inch TFT color LCD is an ideal display screen for grasping detailed waveform fluctuations. Use with the optional battery pack to alleviate worries about power outages without sacrificing portability.

Model 8430-20 MEMORY HiLOGGER is ideal for a wide range of data acquisition needs in many fields, including auto manufacturing and design applications ranging from onboard testing to equipment maintenance.

Summary of Features

Record 10ms over ALL 10 isolated channels

Monitor waveforms while revising configuration settings

Up to 1GB CF Compatibility gives you more than 1 year of recordings at 2s intervals

Enhanced noise suppression technology

Smallest dimensions in its class

4.3” QGVA-TFT LCD

Direct connection to PC via mini-USB cable for quick data download and PC control

2.5 hours of operation with fully recharged battery pack

Basic specifications (Accuracy guaranteed for 1 year)

No. of channels Analog 10 channels isolated scanning method input. (M3 mm dia. screw terninal block)

Pulse input 4 channels (All pulse inputs share common ground with the main unit)

Measurement parameters Voltage : ±100 mV to ±60 V, 1-5V f.s. 6 ranges, Max. resolution 5μV

Temperature (thermocouples) : -200°C to 2000°C (depend on the sensor), 1 range (K, J, E, T, N, R, S, B), Max. resolution 0.1°C

Temperature (Pt 100 sensor) : not available

Humidity : not available

Totalized pulses : 0 to 1000M count, 1 range (No-voltage 'a' contact, open collector or voltage input), Max. resolution 1 count

Rotation count : 0 to 5000/n (r/s) f.s. 1 range (No-voltage 'a' contact, open collector or voltage input), Resolution 1/n (r/s) Note: n = pulses per rotation (1 to 1,000)

Max. allowable input DC 60V (Analog input), DC -5V to 10V (Pulse input)

Max. rated voltage to earth DC 60V, AC 30Vrms (Upper limit voltage that does not cause damage when applied between input channel and chassis, and between each input channels)

Recording intervals 10ms to 1hour, 19selections (All input channels are scanned at high speed during every recording interval)

Selectable Filters 50Hz, 60Hz, or OFF (digital filtering of high frequencies on analog channels)

Data Recording Capacity Internal storage: 3.5MWords (7MB of two-byte data points, or four-byte pulse measurements)

External storage: Up to 1GB (HIOKI CF cards only)

PC Interface One USB 2.0 series B receptacle (control from a PC)

Display 4.3 inch WQVGA-TFT color LCD (480 × 272 dots)

Function Save data to the CF Card in real time, Numerical Calculation, External trigger input, Trigger output, Alarm output, Scaling

Power Sources (1) 100 to 240V AC, 50/60Hz using AC Adapter Model 9786

(2) Battery Pack Model 9780, Continuous operating time: Approx. 2.5 hours

(3) 12V battery (10 to 16V DC ±10%, please contact HIOKI for connection cord)

Dimensions & Mass 176mm(6.93in) W × 101mm(3.98in) H × 41mm(1.61in) D, 550g(19.4oz) (HiLOGGER only)

Accessories Instruction Manual × 1, Measurement Guide × 1, Application Disk (Logger Utility program) × 1, USB cable × 1, AC Adapter 9786 × 1, Shoulder Strap × 1, Protection Sheet 9809 × 1